Validator: winch/board_temperature
Applicable alarms (1)
Likely outcomes — click to expand
Based on 0 missions where this alarm fired in the last 90 days as of 2026-10-13
Aggregated from fleet operations and refreshed daily. Individual outcomes may vary by site and configuration.
Background
Section titled “Background”The winch board_temperature validator checks the winch board temperature measurement. If the maximum board temperature exceeds a threshold, the validator fails.
graph TD
replace-the-winch["<small><b>Step 1</b></small><br/>Action: Create a work order to replace the wi..."]
replace-the-winch-ev3["<small><b>Step 2</b></small><br/>Action: Create a work order to replace the wi..."]
style replace-the-winch fill:#dcfce7,stroke:#22c55e,color:#14532d
style replace-the-winch-ev3 fill:#dcfce7,stroke:#22c55e,color:#14532d Hover or focus a block to preview it. Select the block to keep the preview open.
Select a hardware variant above to start this troubleshooting flow.
Resolution note
This plaintext block is ready to paste into the Resolution Note field on the ZERP issue you're working. The permalink below gives engineering review access to the full step-by-step timeline including any back-navigation; share it if the case needs a deeper look.
Permalink:
Session is too large to fit in a URL. Use Download session JSON to share the timeline out-of-band.
Did this guide help you get unblocked?
Open suggestions
There are no open suggestions.
Open pull requests
There are no open pull requests.