Power ON a Dock at Manufacturing EOL

published HW: EV4

Overview

This covers initial checks for testing an EV4 Dock, including indications that a dock is powered on and ready.

Applicable to EV4 Dock for powering on at End of Line (EOL) testing or in Maintenance. If the dock is new to EOL testing, start with this procedure before proceeding with the “Communicating with a Dock at EOL” procedure.

Troubleshooting Steps

graph TD
    ensure-that-the-dock-is-powered["<small><b>Step 1</b></small><br/>Action: Check that the power cord is fully se..."]
    indicator-light-check{"<small><b>Step 2</b></small><br/>Question: Check the indicator light on the dock..."}
    contact-support-if-issue-persists["<small><b>Step 3</b></small><br/>Action: If the issue persists, contact Dock E..."]
    issue-resolved["<small><b>Step 4</b></small><br/>Action: Issue is Resolved, continue with EOL ..."]
    ensure-that-the-dock-is-powered --> indicator-light-check
    indicator-light-check -->|Yes, I see a green light.| issue-resolved
    indicator-light-check -->|No, the light is a differen...| contact-support-if-issue-persists
    style ensure-that-the-dock-is-powered fill:#dcfce7,stroke:#22c55e,color:#14532d
    style indicator-light-check fill:#dbeafe,stroke:#3b82f6,color:#1e3a5f
    style contact-support-if-issue-persists fill:#dcfce7,stroke:#22c55e,color:#14532d
    style issue-resolved fill:#dcfce7,stroke:#22c55e,color:#14532d

Hover or focus a block to preview it. Select the block to keep the preview open.

1 action

Check that the power cord is fully seated in the dock and plugged into a power source. If the dock is not powered, plug it in and ensure the power source is active.

Did this guide help you get unblocked?

Open suggestions

There are no open suggestions.

Open pull requests

There are no open pull requests.