Skip to content

DROID_ZIP_COMMANDER_MISSING_INPUTS

published Last Updated: Oct 9, 2026 HW: all
Applicable alarms (1)
DROID_ZIP_COMMANDER_MISSING_INPUTS
Likely outcomes (0 missions) — click to expand

Based on 0 missions where this alarm fired in the last 90 days as of 2026-10-13

Aggregated from fleet operations and refreshed daily. Individual outcomes may vary by site and configuration.

The Zip Commander is a piece of Droid software that tells the Zip to go upwind during a delivery in order to enable high wind deliveries without being blown away.

This error code is present when all of the data necessary for running the zip commander is not present. In most cases, this error code will be directly associated with other errors because if an upstream error causes an input for the zip commander to not be present, it will not run and will display this error. It is for this reason that it is suggested to diagnose upstream errors first before falling back to asking about this error. In the rare case that this is the only error present, please reach out to the engineering owners for diagnosis.

1 question
Are there other error codes upstream of this error?

Did this guide help you get unblocked?

Open suggestions

There are no open suggestions.

Open pull requests

There are no open pull requests.