Skip to content

FAILED_TO_RAMP_CURRENT

published Last Updated: Oct 9, 2026 HW: all
Applicable alarms (1)
FAILED_TO_RAMP_CURRENT
Likely outcomes (9 missions) — click to expand

Based on 9 missions where this alarm fired in the last 90 days as of 2026-10-13

Aggregated from fleet operations and refreshed daily. Individual outcomes may vary by site and configuration.

The Aircraft battery cannot start charging due to the charger failing to ramp up current at the start of a charging session.

This can occur when the output voltage of the DeltaQ charger is lower than what was commanded due to low precision voltage output and the voltage differential between the charger and battery is too low to see a current.

Example Log

1 question
At the moment when this alarm displays, is the Dock’s operations mode showing DEGRADED?

Did this guide help you get unblocked?

Open suggestions

There are no open suggestions.

Open pull requests

There are no open pull requests.