Skip to content

TEST: Telemetry step embed

draft Last Updated: Oct 9, 2026 HW: all

This is a temporary test fixture for the telemetry-step feature described in planning/telemetry-step-feature.md. It exercises the type: "telemetry" step end to end: the technician enters a mission identifier, and the bound winch_temperature_check plot renders inline. Delete this topic once the feature has a real home.

1 telemetry
Apply the winch_temperature_check template to the failing mission. The plot below shows the winch board temperature against the ambient-temperature threshold over the mission. If the maximum board temperature stays under the threshold, the validator failure is spurious.

Paste the mission identifier from the alarm report. The winch_temperature_check plot loads in place below.

Enter the mission identifier above to load the plot.

Did this guide help you get unblocked?

Open suggestions

There are no open suggestions.

Open pull requests

There are no open pull requests.