Skip to content

MIXED_HARDWARE_FAULT

published Last Updated: Oct 9, 2026 HW: all
Applicable alarms (1)
MIXED_HARDWARE_FAULT
Likely outcomes (36 missions, 74 issues) — click to expand

Based on 36 missions where this alarm fired in the last 90 days as of 2026-10-13

Grounding vs discrepancy (of 74 ZERP issues filed on these missions)

Grounding 0% (0 of 74 issues) Discrepancy 100% (74 of 74 issues)

Top work orders

  • Perform Software Update on Aircraft · MAINTENANCE_ACTION 30
  • EV2: Replace Aft Motor Assembly on Aircraft · MAINTENANCE_ACTION 30
  • EV2/EV3 Perform Preflight Without Motors · INSPECTION 22
  • EV2: Mixed Hardware Fault Troubleshooting · TROUBLESHOOTING 18
  • EV2: Replace Mixed Motor on Aircraft Aft Motor Assembly · MAINTENANCE_ACTION 18

Frequently replaced parts

Part P/N Removals
AFT MOTOR ASSY, ZIP, P2 23548 210
MIXED MOTOR ASSY, ZIP, P2 25263 126
BATTERY ASSY, ZIP, P2 27158 28
PCBA, COATED, TAIL NODE, PRE-EV2, ZIP, P2 29407 21
CCW HOVER MOTOR ASSY, ZIP, P2 19607 20

Frequently co-occurring alarms (% of the 36 missions above)

PORT_A_LINK_FAULT 94.4% of missions PORT_B_LINK_FAULT 88.9% of missions MOTOR_FREEWHEELING_TEMPORARILY 80.6% of missions SENSOR_REJECTED 77.8% of missions FORCE_X_ANOMALY_DETECTED 47.2% of missions

Aggregated from fleet operations and refreshed daily. Individual outcomes may vary by site and configuration.

The mixed load switch faulted due to an overcurrent.

1 reference

Did this guide help you get unblocked?

Open suggestions

There are no open suggestions.

Open pull requests

There are no open pull requests.