Skip to content

SW_EXTENDED_OVERCURRENT

published Last Updated: Oct 9, 2026 HW: all
Applicable alarms (1)
SW_EXTENDED_OVERCURRENT
Likely outcomes (16 missions, 13 issues) — click to expand

Based on 16 missions where this alarm fired in the last 90 days as of 2026-10-13

Grounding vs discrepancy (of 13 ZERP issues filed on these missions)

Grounding 84.6% (11 of 13 issues) Discrepancy 15.4% (2 of 13 issues)

Frequently replaced parts

Part P/N Removals
CCW HOVER MOTOR ASSY, ZIP, P2 19607 12
CW HOVER MOTOR ASSY, ZIP, P2 33333 8

Frequently co-occurring alarms (% of the 16 missions above)

BATTERY_UNSAFE_TO_CHARGE 100% of missions

Aggregated from fleet operations and refreshed daily. Individual outcomes may vary by site and configuration.

This alarm occurs when the Aircraft battery pack has experienced an extended overcurrent event.

1 telemetry
Enter the mission ID from the failed mission to load the Battery Health Overcurrent Check. Review /distro_a.zip_battery_telemetry.pack_current and check whether it exceeded 300 A.

Paste the mission identifier from the alarm report. The battery_health_overcurrent_check plot loads in place below.

Enter the mission identifier above to load the plot.

Did this guide help you get unblocked?

Open suggestions

There are no open suggestions.

Open pull requests

There are no open pull requests.